Note: Pack size is 4.6 litres or 18.3 litres including hardener. Use the Wintergrade version for application below 10☌ and faster curing times in normal conditions. The aluminium range is particularly suited for submerged areas (look in choose colour for Aluminium or Aluminium red-toned). Aluminium flakes within the coatings create an impenetrable barrier to water and increased coating flexibility.įor best results apply two coats above the waterline and three coats below the waterline at a typical spreading rate of 8 m² per litre. Jotamastic 80 is built on the same technology platform as Jotamastic 87 and is recommended as an anti-corrosive coating for steel above and below water. primer, mid coat, finish coat or as single coat system in atmospheric environments. Specially designed for areas where optimum surface preparation is not possible or desired. It is a surface tolerant, high solids product. Jotamastic 80 is a two-pack epoxy mastic paint, which can be applied at low film thicknesses (from 75 to 200 microns in a single coat). This is a two component polyamine cured epoxy mastic coating.
0 kommentar(er)
